Genuine Honeywell MAP for CM5-LTS

Torqbyte Inc.

$99.00 USD 

Share:

Genuine Honeywell Absolute Pressure Sensor

Kit Option Includes:

  • 50PSI or 100PSI Absolute Pressure Brass-Body Sensor with a 1/8" NPT Male Thread
  • Brass barbed hose fitting for 3/16" (4.76mm) ID Vacuum Hose
  • Factory-terminated CM5-LTS Input/Output Harness with a genuine Delphi/Aptiv Sealed 3-Position Metri-Pack 150 Connector


Sensor Linear Transfer Function:

0.5V = 0 PSI (0 kPa) absolute 
4.5V = 50PSI (345 kPa) absolute / 35PSI (241 kPa) boost

0.5V = 0 PSI (0 kPa) absolute
4.5V = 100PSI (690 kPa) absolute / 85PSI (586 kPa) boost

Connect With Us

Latest Posts

  • GPO - Generic Boost Cut Strategy

    CM5 and CM5-LT are able implement 3 water methanol safety approaches and take action to cut boost whenever system trouble is detected in order to save the engine from overboost. The 3 safety approaches are: Approach 1: Activate one of the two... Read more →

  • GPO - Relay Control

    CM5 and CM5-LT are equipped with two, pull-to-ground, General Purpose Outputs, GPO1 and GPO2 that can each be configured to switch ON or OFF either ABOVE or BELOW some setpoint. This setpoint is a combination of engine RPM and either... Read more →

  • GPO - Auxiliary Injector Control

    CM5 and CM5-LT are equipped with two, pull-to-ground, General Purpose Outputs, GPO1 and GPO2 that can each be controlled with a separate 3D 16x16 cell duty table. In this mode the outputs are pulsed at a fixed frequency of 30Hz. One possible use... Read more →