Products

  • 52mm gaugeART Gauge QUICK VIEW 52mm gaugeART Gauge Out of stock

    52mm gaugeART Gauge

    $359.00 USD

    Sorry, this item is out of stock

    The gaugeART CAN Gauge is an innovative compact OLED gauge for displaying real-time data from your CM5-LTS.The gauge interfaces with the CM5-LTS through a CAN-Enabled I/O Expansion Module and special 1.5m/5ft long...
    View full product details →
  • Auxiliary Pump Harness for CM5-LTS QUICK VIEW Auxiliary Pump Harness for CM5-LTS $29.00 USD

    Auxiliary Pump Harness for CM5-LTS

    $29.00 USD

    Supplied with 2 Blue Molex/TE PermaSeal/DuraSeal 16-14AWG wire splices (not shown) Length: 14ft (425cm)Wire: 14AWG Automotive SXL Wire
    View full product details →
  • BPM4 QUICK VIEW BPM4 Out of stock

    BPM4

    $249.00 USD

    Sorry, this item is out of stock

    Keven BMW Kits
    View full product details →
  • CAN-Enabled I/O Expansion Module for gaugeART Gauge QUICK VIEW CAN-Enabled I/O Expansion Module for gaugeART Gauge Out of stock

    CAN-Enabled I/O Expansion Module for gaugeART Gauge

    $165.00 USD

    Sorry, this item is out of stock

    Note: Although it looks the same, the I/O Expansion Module in this kit is not the same as the Standard CM5-LTS I/O Expansion Module (the boards inside are different).The unterminated Orange...
    View full product details →
  • CM5-LTS - Water Methanol Injection Controller QUICK VIEW CM5-LTS - Water Methanol Injection Controller from $449.00 USD

    CM5-LTS - Water Methanol Injection Controller

    $449.00 USD

    Controls 1 or 2 Water Methanol Injection (WMI) pumps in forced induction gasoline or diesel setups  Industry’s first 3D mapped PWM duty control based on Engine RPM and Boost - not available with typical "progressive"...
    View full product details →
  • Direct Universal CANBus Adapter for CM5-LTS – Standard Length QUICK VIEW Direct Universal CANBus Adapter for CM5-LTS – Standard Length $99.00 USD

    Direct Universal CANBus Adapter for CM5-LTS – Standard Length

    $99.00 USD

    Mates Directly with the CM5-LTS Harness Note: Optional CM5-LTS  I/O Expander Module is Not Required Length: 5ft (1.5m)Wire: 20AWG Automotive TXL Wire
    View full product details →
  • Direct VAG CAN Gateway PnP Adapter for CM5-LTS - Standard Length QUICK VIEW Direct VAG CAN Gateway PnP Adapter for CM5-LTS - Standard Length $149.00 USD

    Direct VAG CAN Gateway PnP Adapter for CM5-LTS - Standard Length

    $149.00 USD

    Plug-n-Play solution for obtaining RPM and Boost directly from the vehicle's CANBus Gateway located under the dash directly above the steering wheel universal joint. Compatible with 2016+ Audi A3/S3/RS3 and...
    View full product details →
  • Expansion Universal CANBus Adapter for CM5-LTS - Extended Length QUICK VIEW Expansion Universal CANBus Adapter for CM5-LTS - Extended Length $135.00 USD

    Expansion Universal CANBus Adapter for CM5-LTS - Extended Length

    $135.00 USD

    Mates Directly with the CM5-LTS I/O Expansion Module Extended length is ideal for setups where the controller and the CAN gateway are installed at opposite ends of the vehicle (e.g....
    View full product details →
  • Expansion Universal CANBus Adapter for CM5-LTS - Standard Length QUICK VIEW Expansion Universal CANBus Adapter for CM5-LTS - Standard Length $115.00 USD

    Expansion Universal CANBus Adapter for CM5-LTS - Standard Length

    $115.00 USD

    Mates Directly with the CM5-LTS I/O Expansion Module Standard length is ideal for setups where the controller and the CAN gateway are installed at the same end of the vehicle...
    View full product details →
  • Expansion VAG CAN Gateway PnP Adapter for CM5-LTS - Extended Length QUICK VIEW Expansion VAG CAN Gateway PnP Adapter for CM5-LTS - Extended Length $175.00 USD

    Expansion VAG CAN Gateway PnP Adapter for CM5-LTS - Extended Length

    $175.00 USD

    Plug-n-Play solution for obtaining RPM and Boost directly from the vehicle's CANBus Gateway. Compatible with 2016+ Audi A3/S3/RS3 and Mk7 Golf GTI, Golf R models.Mates Directly with the CM5-LTS I/O...
    View full product details →
  • Expansion VAG CANBus Gateway PnP Adapter for CM5-LTS - Standard Length QUICK VIEW Expansion VAG CANBus Gateway PnP Adapter for CM5-LTS - Standard Length $155.00 USD

    Expansion VAG CANBus Gateway PnP Adapter for CM5-LTS - Standard Length

    $155.00 USD

    Plug-n-Play solution for obtaining RPM and Boost directly from the vehicle's CANBus Gateway. Compatible with 2016+ Audi A3/S3/RS3 and Mk7 Golf GTI, Golf R models. Mates Directly with the CM5-LTS...
    View full product details →
  • Fused Power/Ground Kit for CM5-LTS QUICK VIEW Fused Power/Ground Kit for CM5-LTS $29.00 USD

    Fused Power/Ground Kit for CM5-LTS

    $29.00 USD

    Kit Option Includes: Genuine Littelfuse automotive JCASE fuse holder with 10AWG (5.0mm^2) wires Genuine Littelfuse automotive 40A fuse (low profile) Genuine TE Connectivity PIDG Ring Terminals (2x M6, 1x M5 and 1x...
    View full product details →
  • Genuine Honeywell MAP Sensor for CM5-LTS QUICK VIEW Genuine Honeywell MAP Sensor for CM5-LTS $108.00 USD

    Genuine Honeywell MAP Sensor for CM5-LTS

    $108.00 USD

    Genuine Honeywell Heavy-Duty MAP Sensor Kit Option Includes: 6 Bar, 50 PSI or 100 PSI Absolute Pressure Sensor with a 1/8" NPT Male Thread Anodized Aluminum barbed hose fitting for 5/32" (4.0...
    View full product details →
  • PM5 - Brushless Fuel Pump Controller QUICK VIEW PM5 - Brushless Fuel Pump Controller $1,075.00 USD

    PM5 - Brushless Fuel Pump Controller

    $1,075.00 USD
    Pump Coding:  Ti Automotive E5LM / E4LM

    High-Power Brushless Fuel Pump Controller for Automotive Racing Applications Available with optional Integrated Voltage Boosting up to 24Vdc Unlike inferior "repurposed brushless OEM" or "repackaged hobby RC" controller solutions where a controller...
    View full product details →
  • PM5 50PSI Honeywell MAP Sensor QUICK VIEW PM5 50PSI Honeywell MAP Sensor $99.00 USD

    PM5 50PSI Honeywell MAP Sensor

    $99.00 USD

    Genuine Honeywell Absolute Pressure Sensor Standalone MAP Sensor used to control PM5 Voltage Boosting functionality Kit Option Includes: PM5 PnP MAP Sensor Wiring 50PSI Absolute Pressure Brass-Body Sensor with a 1/8" NPT Male...
    View full product details →
1 2 3 Next »

Connect With Us

Latest Posts

  • Updating CM5-LTS Firmware for Use With TorqTune2

    This guide will explain how to update the CM5-LTS firmware so the unit can be used with the latest TorqTune2 software. Note: This firmware update can only be performed on current CM5-LTS units with rectangular LEDs. It is not compatible with... Read more →

  • Determining TorqTune2 MAP Sensor Values

    CM5-LTS is able to obtain boost readings from any analog 0-5V Manifold Absolute Pressure (MAP) sensor, but it requires the user to provide a few senor-specific MAP Calibration parameters (Slope, Intercept, Atmosphere and Deadband) in order to accurately convert the... Read more →

  • Using the Factory BMW T/MAP Sensors with the CM5-LTS

    In most BMW applications with a CM5-LTS WMI controller, it is preferred to obtain boost readings by "teeing" into the factory TMAP sensor wiring. Below is the information on how to do this for several popular BMW TMAPs we have... Read more →