PM5 50PSI Honeywell MAP Sensor

Torqbyte Inc.

$99.00 USD 

Share:

Genuine Honeywell Absolute Pressure Sensor

Standalone MAP Sensor used to control PM5 Voltage Boosting functionality

Kit Option Includes:

  • PM5 PnP MAP Sensor Wiring
  • 50PSI Absolute Pressure Brass-Body Sensor with a 1/8" NPT Male Thread
  • Brass barbed hose fitting for 3/16" (4.76mm) ID Vacuum Hose
  • Factory-terminated PM5 Input/Output Harness with a genuine Delphi/Aptiv Sealed 3-Position Metri-Pack 150 Connector


Sensor Linear Transfer Function:

0.5V = 0 PSI (0 kPa) absolute 
4.5V = 50PSI (345 kPa) absolute / 35PSI (241 kPa) boost

 

Connect With Us

Latest Posts

  • Using the Factory BMW T/MAP Sensors with the CM5-LTS

    In most BMW applications with a CM5-LTS WMI controller, it is preferred to obtain boost readings by "teeing" into the factory TMAP sensor wiring. Below is the information on how to do this for several popular BMW TMAPs we have... Read more →

  • GPO - Generic Boost Cut Strategy

    CM5 and CM5-LT are able implement 3 water methanol safety approaches and take action to cut boost whenever system trouble is detected in order to save the engine from overboost. The 3 safety approaches are: Approach 1: Activate one of the two... Read more →

  • GPO - Relay Control

    CM5 and CM5-LT are equipped with two, pull-to-ground, General Purpose Outputs, GPO1 and GPO2 that can each be configured to switch ON or OFF either ABOVE or BELOW some setpoint. This setpoint is a combination of engine RPM and either... Read more →