BM1 - Bluetooth Module

Torqbyte Inc.

$125.00 USD $175.00 USD

Share:
  • Replaces dash-mounted gauges and indicators
  • Wireless connection to Android and iOS tablets and smartphones with support for Bluetooth Low Energy technology
  • Plug-n-Play operation with existing CM5 / CM5-LT wiring
  • Designed, tested and made in Canada

BM1 is an add-on module for the CM5 / CM5-LT controllers that broadcasts all relevant unit data over a wireless Bluetooth connection for viewing on any compatible Android or iOS tablet or smartphone.

Torqbyte Bluetooth Module

Displayed controller parameters include:

  • Engine Speed
  • Turbocharger/Supercharger Boost
  • Main Output Mode
  • Main Pump Output Duty
  • Main Pump Output Current
  • Auxiliary Output Mode
  • Auxiliary Output Master
  • Auxiliary Pump Output Duty
  • Auxiliary Pump Output Current
  • General Purpose Output 1 (GPO 1) Mode
  • General Purpose Output 1 (GPO 1) Duty
  • General Purpose Output 2 (GPO 2) Mode
  • General Purpose Output 2 (GPO 2) Duty
  • Analog Input A Voltage
  • Analog Input B Voltage
  • General Purpose Input 1 (GPI 1) State
  • General Purpose Input 2 (GPI 2) State
  • CM5 or CM5-LT Firmware Version

Installation

Installation consists of simply plugging the 6-Pin connector already included on the CM5 / CM5-LT Input/Output wire adapter into the Bluetooth Module.

Note: The Bluetooth Module does not need to be mounted in a visible location in the vehicle, but it shouldn't be obstructed by large pieces of metal that may interfere with the wireless link.

Plug-n-Play Operation

TorqView App

TorqView is a free Android and iOS App that lets you view all the operating parameters of a Torqbyte CM5 or CM5-LT controller on your Android or iOS device in real-time.

The TorqView App supports automatic screen rotation and allows switching between day and night display modes that can be changed from a bright color scheme for daytime viewing and an inverted dark color scheme for nighttime viewing.

TorqView Portrait

TorqView Landscape

 

Download TorqView from GooglePlay     Download TorqView from iTunes

Connect With Us

Latest Posts

  • GPO - Generic Boost Cut Strategy

    CM5 and CM5-LT are able implement 3 water methanol safety approaches and take action to cut boost whenever system trouble is detected in order to save the engine from overboost. The 3 safety approaches are: Approach 1: Activate one of the two... Read more →

  • GPO - Relay Control

    CM5 and CM5-LT are equipped with two, pull-to-ground, General Purpose Outputs, GPO1 and GPO2 that can each be configured to switch ON or OFF either ABOVE or BELOW some setpoint. This setpoint is a combination of engine RPM and either... Read more →

  • GPO - Auxiliary Injector Control

    CM5 and CM5-LT are equipped with two, pull-to-ground, General Purpose Outputs, GPO1 and GPO2 that can each be controlled with a separate 3D 16x16 cell duty table. In this mode the outputs are pulsed at a fixed frequency of 30Hz. One possible use... Read more →